home *** CD-ROM | disk | FTP | other *** search
/ Mac Easy 2010 May / Mac Life Ubuntu.iso / casper / filesystem.squashfs / usr / src / linux-headers-2.6.28-15 / arch / sh / Kconfig.debug < prev    next >
Encoding:
Text File  |  2008-12-24  |  5.9 KB  |  207 lines

  1. menu "Kernel hacking"
  2.  
  3. config TRACE_IRQFLAGS_SUPPORT
  4.     def_bool y
  5.  
  6. source "lib/Kconfig.debug"
  7.  
  8. config SH_STANDARD_BIOS
  9.     bool "Use LinuxSH standard BIOS"
  10.     depends on SUPERH32
  11.     help
  12.       Say Y here if your target has the gdb-sh-stub
  13.       package from www.m17n.org (or any conforming standard LinuxSH BIOS)
  14.       in FLASH or EPROM.  The kernel will use standard BIOS calls during
  15.       boot for various housekeeping tasks (including calls to read and
  16.       write characters to a system console, get a MAC address from an
  17.       on-board Ethernet interface, and shut down the hardware).  Note this
  18.       does not work with machines with an existing operating system in
  19.       mask ROM and no flash (WindowsCE machines fall in this category).
  20.       If unsure, say N.
  21.  
  22. config EARLY_SCIF_CONSOLE
  23.     bool "Use early SCIF console"
  24.     help
  25.       This enables an early console using a fixed SCIF port. This can
  26.       be used by platforms that are either not running the SH
  27.       standard BIOS, or do not wish to use the BIOS callbacks for the
  28.       serial I/O.
  29.  
  30. config EARLY_SCIF_CONSOLE_PORT
  31.     hex
  32.     depends on EARLY_SCIF_CONSOLE
  33.     default "0xa4400000" if CPU_SUBTYPE_SH7712 || CPU_SUBTYPE_SH7705
  34.     default "0xa4430000" if CPU_SUBTYPE_SH7720 || CPU_SUBTYPE_SH7721
  35.     default "0xf8420000" if CPU_SUBTYPE_SH7619
  36.     default "0xff804000" if CPU_SUBTYPE_MXG
  37.     default "0xffc30000" if CPU_SUBTYPE_SHX3
  38.     default "0xffe00000" if CPU_SUBTYPE_SH7780 || CPU_SUBTYPE_SH7763 || \
  39.                 CPU_SUBTYPE_SH7722 || CPU_SUBTYPE_SH7366 || \
  40.                 CPU_SUBTYPE_SH7343
  41.     default "0xffe80000" if CPU_SH4
  42.     default "0xffea0000" if CPU_SUBTYPE_SH7785
  43.     default "0xfffe8000" if CPU_SUBTYPE_SH7203
  44.     default "0xfffe9800" if CPU_SUBTYPE_SH7206 || CPU_SUBTYPE_SH7263
  45.     default "0x00000000"
  46.  
  47. config EARLY_PRINTK
  48.     bool "Early printk support"
  49.     depends on SH_STANDARD_BIOS || EARLY_SCIF_CONSOLE
  50.     help
  51.       Say Y here to redirect kernel printk messages to the serial port
  52.       used by the SH-IPL bootloader, starting very early in the boot
  53.       process and ending when the kernel's serial console is initialised.
  54.       This option is only useful porting the kernel to a new machine,
  55.       when the kernel may crash or hang before the serial console is
  56.       initialised. If unsure, say N.
  57.  
  58.       On devices that are running SH-IPL and want to keep the port
  59.       initialization consistent while not using the BIOS callbacks,
  60.       select both the EARLY_SCIF_CONSOLE and SH_STANDARD_BIOS, using
  61.       the kernel command line option to toggle back and forth.
  62.  
  63. config DEBUG_BOOTMEM
  64.     depends on DEBUG_KERNEL
  65.     bool "Debug BOOTMEM initialization"
  66.  
  67. config DEBUG_STACKOVERFLOW
  68.     bool "Check for stack overflows"
  69.     depends on DEBUG_KERNEL && SUPERH32
  70.     help
  71.       This option will cause messages to be printed if free stack space
  72.       drops below a certain limit.
  73.  
  74. config DEBUG_STACK_USAGE
  75.     bool "Stack utilization instrumentation"
  76.     depends on DEBUG_KERNEL
  77.     help
  78.       Enables the display of the minimum amount of free stack which each
  79.       task has ever had available in the sysrq-T and sysrq-P debug output.
  80.  
  81.       This option will slow down process creation somewhat.
  82.  
  83. config 4KSTACKS
  84.     bool "Use 4Kb for kernel stacks instead of 8Kb"
  85.     depends on DEBUG_KERNEL && (MMU || BROKEN) && !PAGE_SIZE_64KB
  86.     help
  87.       If you say Y here the kernel will use a 4Kb stacksize for the
  88.       kernel stack attached to each process/thread. This facilitates
  89.       running more threads on a system and also reduces the pressure
  90.       on the VM subsystem for higher order allocations. This option
  91.       will also use IRQ stacks to compensate for the reduced stackspace.
  92.  
  93. config IRQSTACKS
  94.     bool "Use separate kernel stacks when processing interrupts"
  95.     depends on DEBUG_KERNEL && SUPERH32
  96.     help
  97.       If you say Y here the kernel will use separate kernel stacks
  98.       for handling hard and soft interrupts.  This can help avoid
  99.       overflowing the process kernel stacks.
  100.  
  101. config SH_KGDB
  102.     bool "Include KGDB kernel debugger"
  103.     select FRAME_POINTER
  104.     select DEBUG_INFO
  105.     depends on CPU_SH3 || CPU_SH4
  106.     help
  107.       Include in-kernel hooks for kgdb, the Linux kernel source level
  108.       debugger.  See <http://kgdb.sourceforge.net/> for more information.
  109.       Unless you are intending to debug the kernel, say N here.
  110.  
  111. menu "KGDB configuration options"
  112.     depends on SH_KGDB
  113.  
  114. config MORE_COMPILE_OPTIONS
  115.     bool "Add any additional compile options"
  116.     help
  117.       If you want to add additional CFLAGS to the kernel build, enable this
  118.       option and then enter what you would like to add in the next question.
  119.       Note however that -g is already appended with the selection of KGDB.
  120.  
  121. config COMPILE_OPTIONS
  122.     string "Additional compile arguments"
  123.     depends on MORE_COMPILE_OPTIONS
  124.  
  125. config KGDB_NMI
  126.     def_bool n
  127.     prompt "Enter KGDB on NMI"
  128.  
  129. config SH_KGDB_CONSOLE
  130.     def_bool n
  131.     prompt "Console messages through GDB"
  132.     depends on !SERIAL_SH_SCI_CONSOLE && SERIAL_SH_SCI=y
  133.     select SERIAL_CORE_CONSOLE
  134.  
  135. config KGDB_SYSRQ
  136.     def_bool y
  137.     prompt "Allow SysRq 'G' to enter KGDB"
  138.     depends on MAGIC_SYSRQ
  139.  
  140. comment "Serial port setup"
  141.  
  142. config KGDB_DEFPORT
  143.     int "Port number (ttySCn)"
  144.     default "1"
  145.  
  146. config KGDB_DEFBAUD
  147.     int "Baud rate"
  148.     default "115200"
  149.  
  150. choice
  151.     prompt "Parity"
  152.     depends on SH_KGDB
  153.     default KGDB_DEFPARITY_N
  154.  
  155. config KGDB_DEFPARITY_N
  156.     bool "None"
  157.  
  158. config KGDB_DEFPARITY_E
  159.     bool "Even"
  160.  
  161. config KGDB_DEFPARITY_O
  162.     bool "Odd"
  163.  
  164. endchoice
  165.  
  166. choice
  167.     prompt "Data bits"
  168.     depends on SH_KGDB
  169.     default KGDB_DEFBITS_8
  170.  
  171. config KGDB_DEFBITS_8
  172.     bool "8"
  173.  
  174. config KGDB_DEFBITS_7
  175.     bool "7"
  176.  
  177. endchoice
  178.  
  179. endmenu
  180.  
  181. if SUPERH64
  182.  
  183. config SH64_PROC_ASIDS
  184.     bool "Debug: report ASIDs through /proc/asids"
  185.     depends on PROC_FS && MMU
  186.  
  187. config SH64_SR_WATCH
  188.     bool "Debug: set SR.WATCH to enable hardware watchpoints and trace"
  189.  
  190. config POOR_MANS_STRACE
  191.     bool "Debug: enable rudimentary strace facility"
  192.     help
  193.       This option allows system calls to be traced to the console.  It also
  194.       aids in detecting kernel stack underflow.  It is useful for debugging
  195.       early-userland problems (e.g. init incurring fatal exceptions.)
  196.  
  197. config SH_ALPHANUMERIC
  198.     bool "Enable debug outputs to on-board alphanumeric display"
  199.     depends on SH_CAYMAN
  200.  
  201. config SH_NO_BSS_INIT
  202.     bool "Avoid zeroing BSS (to speed-up startup on suitable platforms)"
  203.  
  204. endif
  205.  
  206. endmenu
  207.